PullRite’s SuperLite SinglePoint (1P) Garners Awards at Distributor Shows

02/07/2018 5:41pm

Mishawaka, IN (February 7, 2018) – PullRite Towing Systems introduced its new SuperLite Single Point (1P) 5th Wheel Hitch at the distributor shows this past month. 

With the accolades and excitement the hitch received from RV professionals across North America, PullRite anticipates this to be the companies most successful hitch introduction since the roll out of the ISR SuperGilde in 2010.

The SuperLite Single Point 5th Wheel Hitch is the ultimate answer for customers that want a safe, easy to use, lightweight, thoroughly tested and SAE rated hitch that attaches to any O.E. or aftermarket gooseneck towing system. 

Unlike several current models that can and often do cause damage to the truck bed, the SuperLite Single Point incorporates Bed Saver Rails that act as a buffer between the hitch base and the bed.  The optional Bed Saver Rail Lube Plate Kit, sold separately, provides even more protection from bed damage and creates the quietest, smoothest ride available. The underside of the Bed Saver Rails are lined with a protective coating to eliminate aluminum-to-steel corrosion, protect from scratches and reduce the hitch rotation on the ball.  The Bed Saver Rails insulate the truck from fore and aft movement inherent in single point attachment hitches.

As with all PullRite products, the SuperLite Single Point has been subjected to extensive testing, both Static and Dynamic.  The unique “Arch” frame design, coupled with the use of high grade US Steel component, enabled the hitch to achieve a SAE J2638 rating of 20K while sporting a mere 64 lb. installation weight. 

Once the hitch is installed it is secured by a conical washer and high grade steel bolt and nut. This unique design eliminates the need for “re-torqueing” after hitching to the trailer, a requirement on other single point hitches.  For added security the steel Draw-down bolt is drilled to allow for the optional Lock-Kit to be installed (sold separately #2617).

Like the SuperLite 4P – ISR mount, #2400, the new SuperLite 1P incorporates PullRite’s exclusive “Ball and Funnel” coupling system.  This design provides the owner with the easiest hook-up and release process ever available in recreational 5th wheel towing. 

With the Ball completely visible form the driver’s seat, simply position it anywhere over the receiver funnel at any angle and let your landing gear drop the ball into the receiver tube.  Use the remote latch system that is accessible from outside the truck bed to lock the hitch.

The flexible design of both models allow the king pin to be positioned rear of the trucks axle allowing for a tighter turning radius for both long and short bed tow vehicles.

For more information, go to www.PullRite.com.

About PullRite Towing Systems
PullRite is one of the innovation leaders in the hitch market with the finest 5th Wheel/Gooseneck towing solutions. All PullRite products our “Proudly Made in the USA”!